Follow Us on Twitter
BOS Beam Observation Systems Quote Form FORMAL QUOTE PRICES ONLY Standard Systems BOS-18, Beam Observation System, 18mm Diameter Imaging Area (Chamber: welded window,2.75" Conflat®) BOS-18-FO, Beam Observation System, 18mm Diameter Imaging Area (Fiberoptic window, 2.75" Conflat®) BOS-18-IW, Beam Observation System, 18mm Diameter Imaging Area, Image Wedge, 90-Degree Imaging BOS-25, Beam Observation System, 25mm Diameter Imaging Area (welded window, 4.50" Conflat®) BOS-25-6, Beam Observation System, 25mm Diameter Imaging Area (welded window, 6.00" Conflat®) BOS-40, Beam Observation System, 40mm Diameter Imaging Area (Chamber: welded window,4.50" Conflat®) BOS-40-6, Beam Observation System, 40mm Diameter Imaging Area (welded window, 6.00" Conflat®) BOS-40-6-FO, Beam Observation System, 40mm Diameter Imaging Area (Fiberoptic window, 6.00" Conflat®) BOS-40-IW, Beam Observation System, 40mm Diameter Imaging Area, Image Wedge, 90-Degree Imaging BOS-75, Beam Observation System, 75mm Diameter Imaging Area (welded window, 8.00" Conflat®) BOS-75-FO, Beam Observation System, 75mm Diameter Imaging Area (Fiberoptic Window, 8.00" Conflat®) OPTIONS MCP Dual MCP, (OPT-01). Impedance matched MCPs, (Dual MCP option only). MCP Coating, (Input Side). Choose from CsI, CuI, MgF2, MgO, KBr, Cu, and Au Pitch (choose 3,6,10,12, or 32) Bias Angle (Choose 0,5,8,12,or 19 Deg.) Aspect Ratio (choose 60:1 or 80:1) MCP Front surface to Flange vacuum side surface distance(BOS-25-6-EXT and BOS-40-6-EXT only) (mm) Phosphor Screen P-43 (15 micron) with Aluminum (500Å) overcoat standard Phosphor type, Please state desired phosphor type and conductive coating type if required Metal anode in place of phosphor screen, particle detection applications. (Reduces cost of base system. Usually specified with no viewport chamber option(see below)). Vacuum chamber viewport type Standard window is welded pyrex glass window. Options included: Pyrex, Removeable. Quartz, Removeable. Fused Silica, Removeable. Sapphire, Removeable. Fiberoptic/phosphor screen window, removeable. No Viewport (Reduces cost of base system. Normally specified with metal anode for particle detection only). Feedthroughs Standard feedthroughs are MHV, 5kV with feedthrough orientation out of EDGE of flange. SHV, 5kV. SHV-B, 7.5kV. (Phosphor screen only) 50 Ohm BNC Feedthrough for metal anode connection. Particle detection systems with metal anode configuration. Feedthrough orientation- Out of FACE of flange. Imager/Detector Shield MCP/Phosphor screen assembly has a shield assembly at front of imager/detector to shield MCP/phosphor potentials from incoming beam. This shield is normally grounded to vacuum chamber. Floating shield. Attached to MCP front connection. Allows MCP front to be biased to a potential other than ground. Beam Attenuation Grids for prolonging MCP life Ion beams greater than 3.2 nA/mm2, 90% beam attenuation (1 grid) Ion beams greater than 31.8 nA/mm2, 99% beam attenuation (2 grids) Ion beams greater than 318.nA/mm2, 99.9% beam attenuation (3 grids) Electron Suppression Grid 99% transmission grid for electron suppression. Camera Systems Include camera, lens, mounting hardware and monochrome video monitor. BOS-OPT02/2622 (COHU 2622) BOS-OPT02/2722 (COHU 2722) BOS-OPT02/3710 (CIDTEC 3710D) Custom, customer specified Image Processing System Video monitor, PCI bus Frame grabber, Image Processing Software Power Supplies: Single MCP, 0-1kV Dual MCP, 0-2kV Phosphor Screen, 0-5kV Name: Company/Institution: Address: Address: Country: Email Address: Phone: Fax: Please enter other special requests or comments below. PLEASE NOTE: Beam Imaging Solutions will answer your quotation request within 1 business day. If you do not hear back from us, your RFQ may have been intercepted by a spam filter. Please contact Dr. Erik Wahlin at erik @ beamimaging.com if you do not receive an immediate response. Thanks.
BOS Beam Observation Systems Quote Form
FORMAL QUOTE PRICES ONLY
Standard Systems
BOS-18, Beam Observation System, 18mm Diameter Imaging Area (Chamber: welded window,2.75" Conflat®)
BOS-18-FO, Beam Observation System, 18mm Diameter Imaging Area (Fiberoptic window, 2.75" Conflat®)
BOS-18-IW, Beam Observation System, 18mm Diameter Imaging Area, Image Wedge, 90-Degree Imaging
BOS-25, Beam Observation System, 25mm Diameter Imaging Area (welded window, 4.50" Conflat®)
BOS-25-6, Beam Observation System, 25mm Diameter Imaging Area (welded window, 6.00" Conflat®)
BOS-40, Beam Observation System, 40mm Diameter Imaging Area (Chamber: welded window,4.50" Conflat®)
BOS-40-6, Beam Observation System, 40mm Diameter Imaging Area (welded window, 6.00" Conflat®)
BOS-40-6-FO, Beam Observation System, 40mm Diameter Imaging Area (Fiberoptic window, 6.00" Conflat®)
BOS-40-IW, Beam Observation System, 40mm Diameter Imaging Area, Image Wedge, 90-Degree Imaging
BOS-75, Beam Observation System, 75mm Diameter Imaging Area (welded window, 8.00" Conflat®)
BOS-75-FO, Beam Observation System, 75mm Diameter Imaging Area (Fiberoptic Window, 8.00" Conflat®)
OPTIONS
MCP
Dual MCP, (OPT-01).
Impedance matched MCPs, (Dual MCP option only).
MCP Coating, (Input Side). Choose from CsI, CuI, MgF2, MgO, KBr, Cu, and Au
Pitch (choose 3,6,10,12, or 32) Bias Angle (Choose 0,5,8,12,or 19 Deg.)
Aspect Ratio (choose 60:1 or 80:1)
MCP Front surface to Flange vacuum side surface distance(BOS-25-6-EXT and BOS-40-6-EXT only) (mm)
Phosphor Screen
P-43 (15 micron) with Aluminum (500Å) overcoat standard
Phosphor type, Please state desired phosphor type and conductive coating type if required
Metal anode in place of phosphor screen, particle detection applications. (Reduces cost of base system. Usually specified with no viewport chamber option(see below)).
Vacuum chamber viewport type
Standard window is welded pyrex glass window.
Options included:
Pyrex, Removeable.
Quartz, Removeable.
Fused Silica, Removeable.
Sapphire, Removeable.
Fiberoptic/phosphor screen window, removeable.
No Viewport (Reduces cost of base system. Normally specified with metal anode for particle detection only).
Feedthroughs
Standard feedthroughs are MHV, 5kV with feedthrough orientation out of EDGE of flange.
SHV, 5kV.
SHV-B, 7.5kV. (Phosphor screen only)
50 Ohm BNC Feedthrough for metal anode connection. Particle detection systems with metal anode configuration.
Feedthrough orientation- Out of FACE of flange.
Imager/Detector Shield
MCP/Phosphor screen assembly has a shield assembly at front of imager/detector to shield MCP/phosphor potentials from incoming beam. This shield is normally grounded to vacuum chamber.
Floating shield. Attached to MCP front connection. Allows MCP front to be biased to a potential other than ground.
Beam Attenuation Grids for prolonging MCP life
Ion beams greater than 3.2 nA/mm2, 90% beam attenuation (1 grid)
Ion beams greater than 31.8 nA/mm2, 99% beam attenuation (2 grids)
Ion beams greater than 318.nA/mm2, 99.9% beam attenuation (3 grids)
Electron Suppression Grid
99% transmission grid for electron suppression.
Camera Systems
Include camera, lens, mounting hardware and monochrome video monitor.
BOS-OPT02/2622 (COHU 2622)
BOS-OPT02/2722 (COHU 2722)
BOS-OPT02/3710 (CIDTEC 3710D)
Custom, customer specified
Image Processing System
Video monitor, PCI bus Frame grabber, Image Processing Software
Power Supplies:
Single MCP, 0-1kV
Dual MCP, 0-2kV
Phosphor Screen, 0-5kV
Name: Company/Institution:
Address:
Address: Country:
Email Address:
Phone:
Fax:
Please enter other special requests or comments below.
PLEASE NOTE: Beam Imaging Solutions will answer your quotation request within 1 business day. If you do not hear back from us, your RFQ may have been intercepted by a spam filter. Please contact Dr. Erik Wahlin at erik @ beamimaging.com if you do not receive an immediate response. Thanks.
© 2011 Beam Imaging Solutions Inc.
Twitter